1. Home
  2. Projects

Project notes

Real jobs, written up plainly. Client names are left out unless the client has agreed to be named.

MB AutomationSheet 6 of 12
Title
Project notes
Notes
4
Covers
Machines, process, drives
Based in
Sydney, NSW

What is on this page

Each note says what the job was, what was done and what equipment was involved. Photos and more detail are added as projects are released by their owners.

Process control

40 kW vacuum distillation pilot plant

The job

A pilot scale vacuum distillation plant rated at 40 kW, controlled by a Siemens S7-1200 PLC with a KTP700 touch panel for the operator.

What we did

  • Programmed a Siemens S7-1200 (CPU 1214C) in SCL using TIA Portal, with a KTP700 HMI.
  • Controlled three pumps through variable frequency drives.
  • Sequenced eleven motorised ball valves and a three way diverter.
  • Controlled two solid state relay heater banks with a PI controller that includes anti windup, so the output recovers cleanly after it has been held at its limit.

Custom machine

Roselle core removing machine

The job

A custom machine that removes the core from roselle fruit, designed as a complete package for a customer.

What we did

  • Designed the mechanism and structure in SolidWorks.
  • Issued fabrication and assembly drawings with the MB Automation title block.
  • Recorded an operating video so the customer could see the machine working.

Upgrade

Lenze 8200 to SEW MOVITRAC B drive replacement

The job

Obsolete Lenze 8200 inverters replaced with SEW MOVITRAC B (MC07B) drives.

What we did

  • Replaced the drives and commissioned them using SEW MOVITOOLS MotionStudio.
  • Approach for a drive swap: record the old drive parameters, check the motor and application data, map the control and feedback signals, parameterise the new drive, then commission on site with a plan to go back if needed.

Control panels we have built

Control cabinets designed, wired and commissioned across platforms, labelled and documented to standard.

Beckhoff CX9020 control cabinet with EtherCAT I/O, an ABB soft starter and labelled DIN rail

Beckhoff EtherCAT cabinet

CX9020 embedded PC with EtherCAT I/O, an ABB soft starter and Secomea remote access. Labelled DIN rail layout and wire numbering throughout.

Machine control
Multi-axis servo panel with ESTUN servo drives, Schneider distribution and TeSys control

Multi-axis servo panel

ESTUN servo drives with Schneider distribution and TeSys control, regulated 24 V supplies and ferruled terminations, built for a clean, serviceable handover.

Servo motion
Siemens SINAMICS S120 multi-axis drive rack with DRIVE-CLiQ cabling and fused motor feeds

SINAMICS S120 drive rack

Siemens S120 Line Module with booksize Motor Modules, DRIVE-CLiQ networking and individually fused motor feeds, labelled for a high axis count machine.

Multi-axis drives

More work

Controller replacement and troubleshooting on an Allen-Bradley MicroLogix 1400, worked in RSLogix 500.

MB Automation Links, our own Windows software that logs OPC UA values into SQL for OEE and reporting. It is built and supported by the engineer who uses it on live production lines.

Related pages

Have a similar job?

Tell us about the machine, the line or the problem. We will reply with the next steps.

Start a project Call 0410 291 986