1. Home
  2. Custom machines

Custom machine design and build

Special purpose machines for Australian manufacturers, designed, built and commissioned around your product and your process. One engineer handles the mechanics, the electrics and the control software.

MB AutomationSheet 3 of 12
Service
Custom machines
Covers
Mechanical, electrical, controls
Safety
AS 4024
Based in
Sydney, NSW

One engineer for the whole machine

A custom machine normally needs three specialists: a mechanical designer, an electrical designer and a PLC programmer. Every handover between them is a place where drawings drift apart and delays start. MB Automation removes those handovers.

Moj Bayest designs the frame and mechanism in SolidWorks, selects the motors, drives and sensors, draws the electrical schematics, writes the PLC and HMI code and commissions the machine on your site. The decisions are made together, so a change to a gearbox does not turn into a surprise in the wiring.

What a custom machine project covers

  • Mechanical3D design, FEA on critical parts, fabrication and assembly drawings
  • ElectricalSchematics, panel layout, motor and drive selection, cable lists
  • ControlsPLC and HMI programming, alarms, recipes and data logging
  • SafetyRisk assessment and safeguarding to the AS 4024 series
  • DeliveryFactory test, on site commissioning, training and handover

Machines we design and build

Examples of the kinds of machine this work covers. If yours is not listed, describe it and we will say plainly whether it is a fit.

Processing machines

Cutting, coring, peeling, sorting and other machines that handle a natural or variable product. One example is a machine that removes the core from roselle fruit.

Handling and feeding

Feeders, transfers, conveyors, pick and place and stacking stations that move product from one process to the next.

Cutting, winding and labelling

Finishing stations that cut, wind or mark a product at line speed, with the drives and sensors to keep them in step.

Process skids and pilot plants

Pumps, valves and heating or cooling packaged as a skid, with sequence and loop control. One example is a 40 kW vacuum distillation pilot plant.

Assembly and test stations

Fixtures and stations that press, fasten, join or check parts, recording the result of every cycle.

Upgrades to existing machines

New drives, new controls or a new mechanism to give an existing machine more speed, a new function or a longer life.

How a custom machine project runs

You approve each stage before the next one starts.

  1. 01

    Brief and concept

    We agree what the machine must do: the product, the rate, the space, the budget and the safety needs. A concept sketch and a budget estimate follow.

  2. 02

    Detailed design

    A 3D model, FEA on critical parts, fabrication drawings, electrical schematics, an I/O list and a functional specification. You review and approve before anything is made.

  3. 03

    Build and test

    Parts are fabricated and machined, the machine is assembled and wired, and the control software is tested offline and then on the machine before it ships.

  4. 04

    Commission and hand over

    On site commissioning, safety validation, operator training, as built drawings, manuals and backed up PLC and HMI programs.

What you receive

A machine that your own team can run and maintain, and the documents that prove how it was designed.

We choose the control platform to suit your plant, your spares and your maintenance team, not the other way around.

  • 3D CAD model and fabrication drawings
  • Electrical schematics, panel layout and cable list
  • PLC and HMI programs, commented, backed up and handed over
  • Functional specification, I/O list and network documentation
  • AS 4024 risk assessment and safeguarding validation records
  • Operation and maintenance manual, and operator training
SolidWorksFEASTEP and PDF drawingsSiemensRockwellBeckhoffOmronSchneiderMitsubishiABBAS 4024

Custom machine questions

What is a custom machine?
A custom machine, also called a special purpose machine, is designed for one process in one plant. It is built when no standard machine does the job, or when a standard machine would need so many changes that a purpose built design is the better answer.
How long does a custom machine take to build?
Simple stations can take a matter of weeks. Larger machines take months. Delivery times for drives, PLCs and fabricated parts often set the schedule, so you get a written schedule with the quote.
How much does a custom machine cost?
It depends on the process, the rate, the materials and the safety requirements, so there is no honest price list. We give a budget range after a first conversation, then a written scope and price once the concept is agreed. Nothing is built before you have approved it.
Who makes the frame and the machined parts?
Frames, sheet metal and machined parts are made by a fabrication workshop. That can be a workshop you already use or one we recommend. We supply the drawings, check the parts, then assemble, wire and commission the machine.
Can the machine be built to Australian safety standards?
We design the safeguarding to the AS 4024 series and keep the risk assessment with the design. Compliance depends on the real machine and how it is used, so the safety functions are validated on the machine during commissioning.
Do you work with the PLC brand my maintenance team already uses?
Yes. We program Siemens, Rockwell, Beckhoff, Schneider, Omron, Mitsubishi and ABB, so the machine can use the controls your team already supports and keeps spares for.

More questions and answers

Have a machine in mind?

Describe what it must do, the product, the rate and the space you have. We will reply with questions and the next step.